Melt and pour: check one mill certificate
Since 1 October 2026 an import declaration of certain steel products states the country where the steel was melted and poured, with a TARIC document code Y376 to Y388, and a proof document coded C131 to C139 that shows that country and the heat number. Upload one mill certificate and see what it states, heat by heat.
Example
| Heat | Melted in | Poured in | Y-code | C-code | Page | Text on the certificate |
|---|---|---|---|---|---|---|
| H24117 | IN | IN | Y377 | C131 | 1 | India |
One heat of our own sample certificate, a made-up certificate from a made-up mill. This is the table you get for your certificate. The sample certificate has three heats; one is shown here.
| Heat | Melted in | Poured in | Y-code | C-code | Page | Text on the certificate | Note |
|---|
The codes are a proposal from what the certificate states. The declarant decides.
What to do next: ask your mill or supplier
This certificate does not state the country of melt and pour for every heat. Send your supplier or mill this request. It asks for the country per heat number, on the mill certificate or in a supplier declaration:
Dear supplier,
For our steel imports into the EU, we have to state the country where the steel was melted and poured, for each heat number, and show it with a document (Commission Implementing Regulation (EU) 2026/1963). Our mill test certificate does not state it for every heat.
Please send us, for each heat number on our orders, the country of melt and pour. Put it on the mill test certificate, or send it as a supplier declaration that lists each heat number with its country.
Thank you.What the rule asks
- At import, the importer provides a mill test certificate that states the country of melt and pour and the heat number.
- Until 30 September 2027, other documents such as invoices or supplier declarations can stand in for a missing certificate. From 1 October 2027 they can only complete it.
- Without verifiable evidence of the country of melt and pour, customs reject the import.
- When other documents are used, customs check them first, which can delay access to the tariff quota.
Source: Commission Implementing Regulation (EU) 2026/1963, articles 1 to 3 and recital 9, read in the Official Journal on 11 November 2026: the text of the regulation.
Separately, for iron and steel products processed outside the EU, the importer must show the country of origin of the steel inputs, unless the goods come from a partner country (Council Regulation (EU) No 833/2014, Article 3g): the sanctions regulation.
Questions about the rule
What is the country of melt and pour?
The country where the raw steel or iron was first produced in liquid form in a steel- or iron-making furnace and then cast into its first solid state. That first solid state can be a semi-finished product such as a slab, billet or ingot, or a finished mill product (Regulation (EU) 2026/1384, Article 4 and its recitals).
Is it the same as the country of origin?
Not always. Customs origin is where the goods underwent their last substantial processing (Union Customs Code, Article 60), for example where a coil was rolled into sheet. The country of melt and pour is where the steel was first melted and cast. Sheet rolled in one country from slabs cast in another has two different countries.
Does the rule apply to my product?
It applies to the steel product categories listed in Annex I to Regulation (EU) 2026/1384. The evidence is asked for from 1 October 2026. Check your goods' code against that Annex.
What if my mill's certificate does not state it?
Ask the mill to state it for every heat. Until 30 September 2027 other documents can stand in for a missing certificate; from 1 October 2027 they can only complete one (Implementing Regulation (EU) 2026/1963, Articles 1 and 3). When a heat lacks it, this check gives you a ready request for the mill.
Which documents can complete a certificate?
Invoices, delivery notes, quality certificates and clauses in purchase orders or contracts, long-term supplier declarations, cost accounting and production documents, customs documents from the exporting country, commercial correspondence and production descriptions, when they carry the missing information (Implementing Regulation (EU) 2026/1963, Article 1).
What happens without evidence?
Customs reject the import (Implementing Regulation (EU) 2026/1963, Article 2). When documents other than the certificate are used, customs check them first, which can delay access to the tariff quota.
Why does 1 October 2027 matter?
From that date other documents can no longer replace a certificate, and the Commission takes the information gathered on the country of melt and pour into account when it distributes the tariff quotas among countries (Regulation (EU) 2026/1384, Article 5).
Pro: 200 checks a month
For desks that check certificates every day: up to 200 checks a calendar month instead of 3 a day, with the same table and CSV. EUR 39 a month excluding VAT, cancel any time. After payment your Pro key arrives by e-mail within a few minutes; paste it in the field "Pro key" above.
Paid through Stripe. The Pro Terms.
Pro 1000: 1,000 checks a month
For importers and stockholders with many certificates: up to 1,000 checks a calendar month. EUR 149 a month excluding VAT, cancel any time. The key arrives by e-mail within a few minutes.
Paid through Stripe. The Pro Terms.
Certificate audit: up to 50 certificates
Send up to 50 mill certificates. You get a table per heat (what each certificate states about the country of melt and pour, with the page), the list of mills to ask, and a ready request for each of them. EUR 149 excluding VAT, once. After payment you get an e-mail with where to send the certificates; the result comes back within two working days.
Paid through Stripe. The Pro Terms.
When the certificate does not say
Many certificates written before the rule do not state where the steel was melted and poured: of 40 public mill certificates we read, 4 stated it. Then the check gives no code and says so, so you know to ask the supplier for a melt and pour statement or another proof. The country is never taken from the mill's address. On those 40 certificates, no code was given where the country was not stated.
Other documents can stand alone for now. If no mill certificate can be provided, customs may accept an invoice, delivery note, quality certificate, long-term supplier declaration or similar document on its own, if it shows both the country of melt and pour and the heat number (Implementing Regulation (EU) 2026/1963, Article 1(3)). This applies from 1 October 2026 to 30 September 2027. From 1 October 2027 they can only add to a mill certificate.
What this check reads today: it is built for mill certificates and tested on them. It does not turn away an invoice, delivery note or supplier declaration: if the country is stated there, it gives the matching C-code (C132, C133, C135). We have not yet tested it on those documents.
What the codes mean
The country of melt and pour (TARIC document code, the Y-code):
- Y376 China
- Y377 India
- Y378 Indonesia
- Y379 Vietnam
- Y380 Malaysia
- Y381 Algeria
- Y382 Japan
- Y383 South Korea
- Y384 Türkiye
- Y385 Iran
- Y386 the EU
- Y387 other countries
- Y388 several countries
The proof that shows the country and the heat number (the C-code). From 1 October 2027 the mill certificate (C131) is the proof; until then the others may stand on their own.
- C131 mill test certificate
- C132 invoice
- C133 delivery note
- C134 quality certificate, or clauses in orders or contracts
- C135 long-term supplier declaration
- C136 cost calculation or production documents
- C137 customs document of the country of export
- C138 commercial correspondence
- C139 production descriptions
The Dutch DMS codebook of 9 November 2026 does not list C133 among its supporting documents: the check marks a C133 to be confirmed before use.
Codes as the Dutch customs codebook and douane.nl list them, read 9 November 2026: douane.nl on the country of melt and pour.
Where the certificate goes
Read in Google's EU region, not used for training. A request flagged by Google's abuse checks may be kept up to 90 days, in the EU. FreightParse keeps no copy on its server.
For a whole steel shipment
Forward the shipment's e-mail, with its invoice, packing list and mill certificates, to docs@freightparse.com. The goods lines of the declaration come back, usually within 5 minutes; ask us to add the melt and pour rows to your results. How the free e-mail test works.
For the quota and cost side of the same imports: Loharo's Steel Trade Measures Tracker and its free CBAM calculator (another company; no payment either way).